INJ 1000 - Injector

2703005

PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20

The midspan injectors connect Ethernet devices without PoE (e.g., switches) to PoE-capable end devices (e.g., IP cameras). As power sourcing equipment (PSE), the injector supplies the required power to a powered device (PD) via the data cable. The injector and end device negotiate the electrical power requirements autonomously.

Dimensional drawing
Width 30.2 mm
Height 130 mm
Depth 120 mm

Color gray
Housing material Plastic

Mounting type DIN rail mounting
Mounting position vertical

Basic functions PSE/Midspan, compliant with IEEE 802.3af, at
Data: Power over Ethernet
Serial transmission speed 10/100/1000 Mbps
Connection method RJ45 jack
No. of channels 1
Pin assignment 1:1
Transmission length 100 m (including patch cables)
Output nominal voltage 54 V DC (PoE)
Output power 30 W
Data: Ethernet
Connection method RJ45 CAT5e

Product type Injector
MTTF 110 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)

Maximum power dissipation for nominal condition 33.6 W
Supply
Supply voltage range 18 V DC ... 57 V DC (Ordinary locations)
24 V DC ... 48 V DC (Hazardous locations)
Nominal supply voltage 24 V DC
48 V DC
Max. current consumption 2.1 A
1.4 A (24 V DC)
0.7 A (48 V DC)
Power consumption ≤ 36 W
Protective circuit Reverse polarity protection

Supply
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm²
Conductor cross section, flexible 0.20 mm² ... 2.50 mm²
Conductor cross section, rigid 0.20 mm² ... 2.50 mm²
Conductor cross section AWG 20 ... 12

Ambient conditions
Degree of protection IP20 (Non-certificated by UL)
Ambient temperature (operation) 0 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
≤ 2000 m (with UL approval)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)

CE
Identification CE-compliant
EAC
Identification EAC
UL, USA/Canada
Identification Class I, Div. 2, Groups A, B, C, D T4
Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge ± 6 kV (Test Level 3)
Discharge in air ± 8 kV (Test Level 3)
Indirect discharge ± 6 kV
Comments Criterion B