SACC-M12FS-8QO SH ETH - Data connector

1421680

Data connector, Ethernet CAT5 (1 Gbps), 8-position, halogen-free, shielded, Socket straight M12, coding: A, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 5 mm ... 9.7 mm

Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Product type Circular connector (cable-side)
Application Data
Sensor type Ethernet
Number of positions 8
No. of cable outlets 1
Shielded yes
Coding A
Cable outlet straight
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Dimensional drawing
Length 57 mm
Wrench size, union nut 15 mm
External dimensions
Outside diameter 5 mm ... 9.7 mm
Housing
Diameter housing 19 mm

Flammability rating according to UL 94 V0
Seal material NBR
Material of grip body Zinc die-cast, nickel-plated
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material for screw connection Zinc die-cast, nickel-plated
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Wire insulation material PVC / PE / PP / rubber

Conductor connection
Connection method Insulation displacement connection
Connection cross section 0.14 mm² ... 0.34 mm² (flexible)
0.14 mm² ... 0.34 mm² (solid)
Connection cross section AWG 26 ... 22 (flexible)
26 ... 22 (solid)
Tightening torque 5 Nm (Pressure nut)
Pin assignment
Contact | Color (signal designation) | Contact (optional) 1 = WHBU (D3-)
2 = WHBN (D4+)
3 = BN (D4-)
4 = OG (D1-)
5 = WHGN (D2+)
6 = WHOG (D1+)
7 = BU (D3+)
8 = GN (D2-)

Rated surge voltage 0.8 kV
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 2 A

Mechanical data
Insertion/withdrawal cycles ≥ 100

Connection 1
Head design Socket
Head cable outlet straight
Head thread type M12
Coding A

Signal type/category Ethernet CAT5 (based on IEC 11801), 1 Gbps

Ambient conditions
Degree of protection IP65
IP67
Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket)
Ambient temperature (assembly) -5 °C ... 50 °C

Testing
Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
M12
Standard designation M12 connector
Standards/specifications according to IEC 61076-2-101