ILC 191 ETH 2TX - Controller

2700976

The Inline controller offers the option of communicating via PROFINET and Modbus/TCP. Programming is carried out using PC Worx Express or PC Worx (IEC 61131-3).

The ILC 191 ETH 2TX is a reliable compact controller for the Inline I/O system. The controller uses directly alignable Inline I/O modules and also is notable for supporting a number of Ethernet-based protocols such as Modbus/TCP or PROFINET.

Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Controller
Product family Inline-Controller
Type modular
Display
Diagnostics display No

Processor Altera Nios® II 64 MHz
Clock frequency 64 MHz
Retentive data storage 48 kByte (NVRAM)
IEC 61131 runtime system
Program memory 1 Mbyte
Data storage system 1 Mbyte
Number of control tasks 8
INTERBUS-Master
Amount of process data max. 4096 bit (INTERBUS)
Number of supported devices max. 128
Number of local bus devices that can be connected max. 63 (observe current consumption)
Number of devices with parameter channel max. 24
Number of supported branch terminals with remote bus branch max. 3
Modbus/TCP-Client
Amount of process data max. 32768 bit (internal Modbus /TCP client)
Number of Modbus/TCP clients max. 16 later than FW 4.42
PROFINET
Device function PROFINET device
Specification 2.2
Vendor ID 00B0hex / 176dez
Function
Diagnostics display No
Controller redundancy No
Safety function No
Functionality
Programming languages supported Instruction list (IL)
Symbolic flowchart (SFC)
Ladder diagram (LD)
Function block diagram (FBD)
Structured text (ST)
System requirements
Engineering tool PC Worx
PC Worx Express
Configuration tool Config+ Version 1.01 or later
Diagnostics tool DIAG+
Runtime system eCLR
Application interface OPC

Transmission medium Copper
Real-time clock
Realtime clock Yes
Description realtime clock integrated (rechargeable battery buffered)
Potentials: 24 V supply UILC
Supply voltage 24 V DC -15 % / +20 % (in accordance with EN 61131-2)
Supply voltage range 19.2 V DC ... 30 V DC
Current draw 80 mA (without connected I/O terminal blocks)
Potentials: 7.5 V communications power UL (potential jumper)
Supply voltage 7.5 V DC ±5 %
Potentials: 24 V analog supply UANA (potential jumper)
Supply voltage 24 V DC -15 % / +20 %
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Potentials: 24 V main supply UM
Supply voltage 24 V DC -15 % / +20 % (in accordance with EN 61131-2)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 8 A DC
6 mA (without sensors)
Potentials: 24 V segment supply US
Supply voltage 24 V DC -15 % / +20 % (in accordance with EN 61131-2)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 8 A DC
10 mA (without actuators)

Digital:
Input name Digital inputs
Description of the input EN 61131-2 type 1 NPN/PNP
Number of inputs 8
Cable length max. 30 m
Connection method Inline potential distributor
Connection technology 2-, 3-, 4-conductor
Input voltage range -0.5 V ... 30 V
Input voltage range "0" signal -0.5 V ... 5 V
Input voltage range "1" signal 15 V ... 30 V
Nominal input current at UIN typ. 7 mA
max. 15 mA
Input filter time typ. 5 ms (Signal change 01)
typ. 5 ms ()