AXC F XT ETH 1TX - PLC extension module

2403115

Left-alignable Ethernet interface, for connection to a compatible modular controller from the PLCnext Control range.

Width 35 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Ethernet
Bus system RJ45
Number of interfaces 1
Connection method RJ45 jack
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100/1000 Mbps (full duplex)
Transmission length max. 100 m

Product type I/O component
Product family PLCnext Control Extension
Type modular

Maximum power dissipation for nominal condition 1.296 W
Potentials: Supply of the logic voltage UL
Supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 80 mA
typ. 54 mA (at UL = 24 V)
Protective circuit Reverse polarity protection; Polarity protection diode
Transient protection; Suppressor diode

Connection technology
Connection name Axioline F connector
Conductor connection
Connection method Push-in connection
Conductor cross section rigid 0.2 mm² ... 1.5 mm²
Conductor cross section flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Stripping length 8 mm
Axioline F connector
Connection method Push-in connection
Conductor cross section, rigid 0.2 mm² ... 1.5 mm²
Conductor cross section, flexible 0.2 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Stripping length 8 mm

Ambient conditions
Ambient temperature (operation) -25 °C ... 60 °C (up to 2000 m above sea level)
Degree of protection IP20
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Permissible humidity (operation) 5 % ... 95 % (according to DIN EN 61131-2)

Protection class III (IEC 61140, EN 61140, VDE 0140-1)

ATEX
Identification  II 3 G Ex ec IIC T4 Gc
Certificate TÜV 19 ATEX 8356 X
References to standards EN IEC 60079-0, EN IEC 60079-7
IECEx
Identification Ex ec IIC T4 Gc
Certificate IECEx TUR 19.0031X
References to standards IEC 60079-0 Ed. 7, IEC 60079-7 Ed. 5.1
CCC / China-Ex
Identification Ex ec IIC T4 Gc
Certificate , 2021122309114456
References to standards GB/T 3836.1-2021, GB/T 3836.3-2021
UL Ex, USA / Canada
Identification Class I, Zone 2, AEx nA IIC T4
Class I, Div. 2, Groups A, B, C, D
Ex nA IIC Gc T4
Certificate E366272
References to standards UL 60079-0, Ed. 6 / CSA C22.2 NO. 60079-0, Ed. 3
UL 60079-15, Ed. 4 / CSA C22.2 NO. 60079-15