SACB-8/16-L-C GG SCO - Header

1516771

Header, application: Standard, connection method: M12-SPEEDCON-socket Metal, number of slots: 8, number of positions: 5, coding: A, slot assignment: Double, status display: Yes, pnp; master cable connection: Pluggable screw connection, shielding: no

Assembly note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Note on application Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".

Product type Header with metric measurement slots
Application Standard
Number of positions 5
Number of slots 8
Coding A
LED yes

Local diagnostics
Monitored function Supply voltage per module
Optical representation Green LED

Max. operating voltage Umax 30 V DC
Local diagnostics Supply voltage per module Green LED
Status display I/O Yellow LED
Nominal voltage UN 24 V DC
Rated current, total 10 A
2x 8 A (For electrical isolation)
Max. current carrying capacity per path 2 A
Current carrying capacity per slot 4 A

Status display present Yes

Dimensional drawing
Width 58 mm
Height 26 mm
Length 153 mm

Material Threaded sleeve Die-cast zinc
Material Housing PBT
Material Molding compound PUR
Flammability rating according to UL 94 V0
Seal material O-ring NBR
Contact material Cu alloy
Contact surface material gold-plated
Contact carrier material PA
Material of contact, master cable side CU alloy
Material of the contact carrier on the master cable side PA 6.6 V0
Material of contact surface, master cable side gold-plated

Connection method Pluggable screw connection

Ambient conditions
Degree of protection IP65
IP67
IP69K
Ambient temperature (operation) -30 °C ... 80 °C

Standard designation M12 connector
Standards/specifications IEC 61076-2-101