Company: | Qingdao Wanan Electronic Technology Co., |
Location: | China - Shandong,275 Chongqing North Road, Chengyang District, Qingdao City |
Price: | Negotiation |
Contact: | qianhuihui(Salesperson) |
Contact Me: |
Mobile:+86-18561906130 |
Manufacturer of steam vortex flowmeter
Vortex flowmeter is mainly used for measuring steam, gas, and liquid
WF-LUGB temperature and pressure compensated vortex flowmeter
summary
Shandong vortex flowmeter belongs to the velocity type flowmeter, developed based on the Carmen vortex principle, and can be widely used to measure the volume flow rate and mass flow rate of liquids, gases, and steam (saturated steam, superheated steam). Vortex flow meters are widely used in industries such as petroleum, chemical, light industry, power heating, environmental protection, municipal engineering, and electricity.
Characteristics of WF-LUGB temperature and pressure compensated vortex flowmeter
1. Steam, gas, and liquid can all be measured
2. Low pressure loss
3. No compensation is required when measuring volumetric flow rate
4. Components with simple structure and no movement wear
5. High precision, high reliability, no need for on-site debugging
6. Easy installation and easy maintenance
7. Can transmit traffic signals over long distances, connect with computers, and achieve integrated management
Technical specifications of WF-LUGB temperature and pressure compensated vortex flowmeter
1. Measuring fluids: saturated steam, superheated steam, compressed air, general gases, liquids, etc
2. Rated pressure: 1.6Mpa, 2.5Mpa, 4.0Mpa and above
3. Body material: 304 stainless steel
4. Output signals: pulse signal, current signal, RS485
5. Electrical interface: M20 * 1.5
6. Environmental temperature: -20-60 degrees Celsius
7. Fluid temperature: -20-350 degrees
8. Accuracy level: liquid level 0.5, gas level 1.5
9. Power supply: 12-24VDC
Differential temperature and pressure compensation vortex flowmeter flow range:
Please consult sales personnel or call to request product color page instructions
Selection guide for temperature and pressure compensated vortex flowmeter
The measurement range of sensors varies depending on their caliber, and the measurement range of each caliber varies with the type of medium being measured, temperature, and pressure.
Therefore, the first step is to determine the general flow range of the fluid in the pipeline, and then determine the appropriate configuration (remote transmission or on-site display, whether temperature and pressure compensation is required, and the selection of an integrator)
The WF-LUGB temperature and pressure compensated vortex flowmeter includes: vortex flow sensor, pressure transmitter (equipped with elbow and needle valve), thermal resistor (including base), HY series digital LCD flow display instrument, flange, bolt gasket.
Disclaimer:All information is provided by registered users. You may assess risks based on corresponding qualifications.
- SMA Female to U.FL coaxial pigtail cable 10cmElectrical Frequency Range DC to 6GHz Connector 1 Standard SMA Female Straight Connector 2 Standard U.FL Plating Goldplated RF Cable Type" "
- 174-230 470-862MHz DVB-T Magnetic AntennaElectrical Frequency Range VHF174-230MHz/UHF470-862MHz Gain 5dBi V.S.W.R ≤2.0 Radiation Omni-Direction Polarization Vertical Impedance 75Ώ Maximum Input" "
- 824-960 1710-1800mgz GSM car traker adhesive AntennaElectrical Frequency Range 824-960/1710-1880MHz Gain 3dBi V.S.W.R ≤2.0 Radiation Omni-Direction Polarization Vertical Maximum Input Power 50W Impedance 50Ώ" "
- 800-2500MHz Wall Mount Indoor Outoode Directional Booster AntennaElectrical Frequency Range 800-960/1710-2500MHz F/B Ratio >20dB Gain 7/10dBi V.S.W.R ≤1.5 Radiation Direction Horizontal Beam width 70°/60° Vertical Beam" "